Hi-Vis softshell Jacket Pesso Palermo, orange

Art. PALERMO_OR

Waterproof, windproof, but breathable softshell material Softshell Pesso jacket.

Special moisture-proof TPU membrane allows the body to breathe and wetness vapour outside. Reflective details. Water-repellent zippers.

EN ISO 20471 icon

Qualities & Benefits

Outer material: durable, moisture-repellent Softshell. 4-way stretch fabric.
Inner lining: cosy and warm fleece lining.
Zipper: Water repellent zippers.
Hood: Spacious, adjustable, detachable zippered hood. Cosy Fleece lining.
Cuffs: Velcro adjustable sleeves. Elastic inner cuffs with thumb loop.
Pockets: functional zipped pockets. Pockets with zippers. Two waist pockets, chest pockets, two inside pockets. Pocket on the left arm.
Back: lengthened back area.
Bottom:  the bottom of the inner part of the jacket is adjustable with laces.

Sizes: S-XXXL
Color: HI-VIS orange

Material: 96% polyester, 4% Spandex
Weight: 310 g/m2
Breathability:  5000g/m24h
Waterproofness: 8000 mm

NANO dry  is a  brand new membrane, that thanks to very innovative technologies ensure excellent protection against big wind, water repellency and breathability, even in the most extreme conditions

Softshells bridged the gap between waterproof hardshell jackets and highly breathable fleece mid-layers. Outdoor activities involving sustained, aerobic output and often in challenging and changeable environments bore out a very real need for a protective yet breathable outer layer.  Softshell features wind resistance, water-resistance and breathability.

Stretch & Freedom of Movement - the ability to move dynamically, in comfort and with little restriction is one of Softshell's key advantages.

Polar Fleece inner lining brings the durability, the texture of yarn & the softness of cotton. This gives their wearers additional warmth especially for people who don’t like missing their workouts even with the colder weather.

STANDARDS
EN ISO 20471 Class 2  CE certified.

Protective garments with enhanced visibility. High visibility garments have fluorescent surfaces and reflectors that conform to certification requirements on the design according to three different classes, and have been tested before and after washing.

SizeC44/XSC46/SC50/MC54/LC56/XLC60/XXL
A Chest measurement cm889296100104108112116120124
B Waist measurement cm76-7980-8384-8788-9192-9697-101102-107108-113114-119120-125
C Seat measurement cm9498102106110114118122126130
D Inside leg measurement cm80808282828284848484

 

Take measurements whilst in your underwear. Use a tape measure. Remember to keep the tape measure tight when measuring, without pulling it. Measure according to instructions and compare your measurements with the right table. All measurements in the tables are close body sizes.

  • A Chest width. Measure over the widest part of the chest.
  • B Waist width. Measure where you normally have your waistband.
  • C Seat width. Measure over the widest part of the seat.
  • D Inside length measurement: Measure along the inside of the leg, from fork to floor.

EN ISO 20471

Protective garments with enhanced visibility. High visibility garments have fluorescent surfaces and reflectors that conform to certification requirements on the design according to three different classes, and have been tested before and after washing. 5 washes is the minimum and if the garment has been tested and approved for a higher number of washes this should be stated on the care label.

 

CLASS 1

Protective garments fitted with fluorescent fabric, with an area of at least 0.14 m≤ and reflectors with an area of 0.10 m≤, for use where the lowest level of visibility is demanded.

CLASS 2

Protective garments fitted with fluorescent fabric, with an area of at least 0.50 m≤ and reflectors with an area of 0.13 m≤, for use where the visibility requirement is not as high as class 3.

CLASS 3

Protective garments fitted with fluorescent fabric, with an area of at least 0.80 m≤ and reflectors with an area of 0.20 m≤, where the highest level of visibility is demanded. Protective garments must cover the torso and at least have sleeves or full-length trousers. The reflectors must wrap around the torso and arm or leg. Minimum reflector width must be 50 mm.