Waterproof Winter Jacket Pesso Denver, Hi Vis Yellow

Qualities & Benefits

Outer material: Main fabric - Polyester OXFORD 300D with PU coating. Durable, waterproof, breathable. EN ISO 20471 Class 2
Seams: All outside seams are heat-sealed from inside with special waterproof tape.

EN ISO 20471 Class 2
Lining: Mesh inner lining for better breathability
Zipper: Large, two-way zipper, which is especially convenient while driving. Additionally fastened flap with press studs.
Hood: Wide, warm detachable hood with visor adjustable string.
Collar: Zipper raised collar, additional fastening studs.
Cuffs: adjustable cuffs with Velcro. Knitted inner ribbed sleeve cuff
Pockets: functional zippered pockets. There are two major functional jacket pockets on the sides and an additional zippered flap. One external chest pocket. Internal chest pocket.
Reflector Details: 5 cm retro-reflective tapes.

Sizes: S - 3XL
Color: HI-VIS Yellow, dark Navy

Material: 100% polyester OXFORD 300D; 100% polyester lining

Resistance to moisture from the outside: 8000 mm
The moisture evaporation from the inside: 3000 g / m² per 24 hours.

STANDARD
EN ISO 20471:2013+A1:2016 Class 2

Pesso Denver jacket with Mesh lining for good ventilation and climate control. Made from Polyester OXFORD 300D with PU coating fabric, with an advanced cut for great functionality and protection.

Pesso Denver Jacket becomes winter jacket after zipped in a jacket from Pesso Fleece jacket collection: FMCP, FMR, FMCN, FMMN

Polyester OXFORD 300D with PU coating. Oxford is a different type of weave that provides better strength and durability than standard plain weaves. Lightweight, flexible, waterproof oxford fabrics usually are used for tents, bags, storage covers, dust covers, flags, advertising inflatables. PU coating for best waterproof properties.

STANDARD
EN ISO 20471:2013+A1:2016 Class 2

Protective garments with enhanced visibility. High visibility garments have fluorescent surfaces and reflectors that conform to certification requirements on the design according to three different classes and have been tested before and after washing.

Size	C44/XS	C46/S	C48/M	C50/M	C52/L	C54/L	C56/XL	C58/2XL	C60/XXL	C62/3XL
A Chest measurement cm	88	92	96	100	104	108	112	116	120	124
B Waist measurement cm	76-79	80-83	84-87	88-91	92-96	97-101	102-107	108-113	114-119	120-125
C Seat measurement cm	94	98	102	106	110	114	118	122	126	130
D Inside leg measurement cm	80	80	82	82	82	82	84	84	84	84

Take measurements whilst in your underwear. Use a tape measure. Remember to keep the tape measure tight when measuring, without pulling it. Measure according to instructions and compare your measurements with the right table. All measurements in the tables are close body sizes.

A Chest width. Measure over the widest part of the chest.
B Waist width. Measure where you normally have your waistband.
C Seat width. Measure over the widest part of the seat.
D Inside length measurement: Measure along the inside of the leg, from fork to floor.

EN ISO 20471

Protective garments with enhanced visibility. High visibility garments have fluorescent surfaces and reflectors that conform to certification requirements on the design according to three different classes, and have been tested before and after washing. 5 washes is the minimum and if the garment has been tested and approved for a higher number of washes this should be stated on the care label.

CLASS 1

Protective garments fitted with fluorescent fabric, with an area of at least 0.14 m≤ and reflectors with an area of 0.10 m≤, for use where the lowest level of visibility is demanded.

CLASS 2

Protective garments fitted with fluorescent fabric, with an area of at least 0.50 m≤ and reflectors with an area of 0.13 m≤, for use where the visibility requirement is not as high as class 3.

CLASS 3

Protective garments fitted with fluorescent fabric, with an area of at least 0.80 m≤ and reflectors with an area of 0.20 m≤, where the highest level of visibility is demanded. Protective garments must cover the torso and at least have sleeves or full-length trousers. The reflectors must wrap around the torso and arm or leg. Minimum reflector width must be 50 mm.