High Visibility band vest Pesso LS-RSV001_G, yellow

Art. LS-RSV001_G

Classic reflective tape configuration band vest will ensure visibility. Lightweight & comfortable.

 

Qualities & Benefits

Lightweight and comfortable.
Reflective tape for increased visibility.
Hook and loop closure for easy access.
Generous fit for wearer comfort
Certified to EN ISO 20471 after 25x washes
CE certified

Material: 100% polyester
Colors:
HI-VIS yellow
Sizes: S/M, L/XL, 2XL/3XL

STANDARDS
EN ISO 20471 Class 2  CE certified.

Protective garments with enhanced visibility. High visibility garments have fluorescent surfaces and reflectors that conform to certification requirements on the design according to three different classes, and have been tested before and after washing. 5 washes is the minimum and if the garment has been tested and approved for a higher number of washes this should be stated on the care label.

SizeC44/XSC46/SC50/MC54/LC56/XLC60/XXL
A Chest measurement cm889296100104108112116120124
B Waist measurement cm76-7980-8384-8788-9192-9697-101102-107108-113114-119120-125
C Seat measurement cm9498102106110114118122126130
D Inside leg measurement cm80808282828284848484

 

Take measurements whilst in your underwear. Use a tape measure. Remember to keep the tape measure tight when measuring, without pulling it. Measure according to instructions and compare your measurements with the right table. All measurements in the tables are close body sizes.

  • A Chest width. Measure over the widest part of the chest.
  • B Waist width. Measure where you normally have your waistband.
  • C Seat width. Measure over the widest part of the seat.
  • D Inside length measurement: Measure along the inside of the leg, from fork to floor.

EN ISO 20471

Protective garments with enhanced visibility. High visibility garments have fluorescent surfaces and reflectors that conform to certification requirements on the design according to three different classes, and have been tested before and after washing. 5 washes is the minimum and if the garment has been tested and approved for a higher number of washes this should be stated on the care label.

 

CLASS 1

Protective garments fitted with fluorescent fabric, with an area of at least 0.14 m≤ and reflectors with an area of 0.10 m≤, for use where the lowest level of visibility is demanded.

CLASS 2

Protective garments fitted with fluorescent fabric, with an area of at least 0.50 m≤ and reflectors with an area of 0.13 m≤, for use where the visibility requirement is not as high as class 3.

CLASS 3

Protective garments fitted with fluorescent fabric, with an area of at least 0.80 m≤ and reflectors with an area of 0.20 m≤, where the highest level of visibility is demanded. Protective garments must cover the torso and at least have sleeves or full-length trousers. The reflectors must wrap around the torso and arm or leg. Minimum reflector width must be 50 mm.