High Visibility Long Sleeve T-Shirt Pesso HVMIL, orange

Art. HVMILOR

Comfort fit construction long-sleeve T-shirt is comfortable & ideal for warmer working conditions. Breathable “Quick dry” fabric to draw moisture away from the body keeping the wearer cool.

 

Qualities & Benefits

Breathable Polycotton "Quick dry" fabric to draw moisture away from body keeping the wear cool. EN ISO 20471 Class 2

New generation reflective printing H pattern around body.

EN ISO 20471 Class 2

Material: 50% cotton, 50% polyester
Weight: 130 g/m2

Colors: HI-VIS orange
Sizes: XS-4XL

STANDARD
EN ISO 20471:2013+A1:2016 Class 2

STANDARD
EN ISO 20471:2013+A1:2016 Class 2

Protective garments with enhanced visibility. High visibility garments have fluorescent surfaces and reflectors that conform to certification requirements on the design according to three different classes and have been tested before and after washing.  5 washes is the minimum and if the garment has been tested and approved for a higher number of washes this should be stated on the care label.

Size C44/XS C46/S C50/M C54/L C56/XL C60/XXL
A Chest measurement cm 88 92 96 100 104 108 112 116 120 124
B Waist measurement cm 76-79 80-83 84-87 88-91 92-96 97-101 102-107 108-113 114-119 120-125
C Seat measurement cm 94 98 102 106 110 114 118 122 126 130
D Inside leg measurement cm 80 80 82 82 82 82 84 84 84 84

 

Take measurements whilst in your underwear. Use a tape measure. Remember to keep the tape measure tight when measuring, without pulling it. Measure according to instructions and compare your measurements with the right table. All measurements in the tables are close body sizes.

  • A Chest width. Measure over the widest part of the chest.
  • B Waist width. Measure where you normally have your waistband.
  • C Seat width. Measure over the widest part of the seat.
  • D Inside length measurement: Measure along the inside of the leg, from fork to floor.

EN ISO 20471

Protective garments with enhanced visibility. High visibility garments have fluorescent surfaces and reflectors that conform to certification requirements on the design according to three different classes, and have been tested before and after washing. 5 washes is the minimum and if the garment has been tested and approved for a higher number of washes this should be stated on the care label.

 

CLASS 1

Protective garments fitted with fluorescent fabric, with an area of at least 0.14 m≤ and reflectors with an area of 0.10 m≤, for use where the lowest level of visibility is demanded.

CLASS 2

Protective garments fitted with fluorescent fabric, with an area of at least 0.50 m≤ and reflectors with an area of 0.13 m≤, for use where the visibility requirement is not as high as class 3.

CLASS 3

Protective garments fitted with fluorescent fabric, with an area of at least 0.80 m≤ and reflectors with an area of 0.20 m≤, where the highest level of visibility is demanded. Protective garments must cover the torso and at least have sleeves or full-length trousers. The reflectors must wrap around the torso and arm or leg. Minimum reflector width must be 50 mm.