Warm zip through Fleece Hoodie Pesso FL05_G, yellow

Art. FL05_G

Lightweight warm fleece hoodie Pesso FL05 with full zipper, practical zipped pockets in High visible Yellow color.

 

Qualities & Benefits

Comfortable, soft and warm. Close fit with some stretch for good flexibility.

Zippered collar.
Elastane re-inforced body and sleeve cuff.
Throughout Zipper closure.
Two side pockets with zippers.
5 cm retro-reflective tapes.

Material: 100% polyester Knitted Diamond Single Fleece
Weight: 155 g/m2
Sizes:  S-3XL
Color: High visibility Yellow

Extremely high-quality fabrics do not fade, shrink.

Polyester Knitted Diamond Single  Fleece brings the durability, the texture of yarn & softness. This gives their wearers additional warmth especially for people who don’t like missing their workouts even with the colder weather.

 

STANDARD
EN ISO 20471 Class 2  CE certified.

Protective garments with enhanced visibility. High visibility garments have fluorescent surfaces and reflectors that conform to certification requirements on the design according to three different classes, and have been tested before and after washing. 

Size C44/XS C46/S C50/M C54/L C56/XL C60/XXL
A Chest measurement cm 88 92 96 100 104 108 112 116 120 124
B Waist measurement cm 76-79 80-83 84-87 88-91 92-96 97-101 102-107 108-113 114-119 120-125
C Seat measurement cm 94 98 102 106 110 114 118 122 126 130
D Inside leg measurement cm 80 80 82 82 82 82 84 84 84 84

 

Take measurements whilst in your underwear. Use a tape measure. Remember to keep the tape measure tight when measuring, without pulling it. Measure according to instructions and compare your measurements with the right table. All measurements in the tables are close body sizes.

  • A Chest width. Measure over the widest part of the chest.
  • B Waist width. Measure where you normally have your waistband.
  • C Seat width. Measure over the widest part of the seat.
  • D Inside length measurement: Measure along the inside of the leg, from fork to floor.

EN ISO 20471

Protective garments with enhanced visibility. High visibility garments have fluorescent surfaces and reflectors that conform to certification requirements on the design according to three different classes, and have been tested before and after washing. 5 washes is the minimum and if the garment has been tested and approved for a higher number of washes this should be stated on the care label.

 

CLASS 1

Protective garments fitted with fluorescent fabric, with an area of at least 0.14 m≤ and reflectors with an area of 0.10 m≤, for use where the lowest level of visibility is demanded.

CLASS 2

Protective garments fitted with fluorescent fabric, with an area of at least 0.50 m≤ and reflectors with an area of 0.13 m≤, for use where the visibility requirement is not as high as class 3.

CLASS 3

Protective garments fitted with fluorescent fabric, with an area of at least 0.80 m≤ and reflectors with an area of 0.20 m≤, where the highest level of visibility is demanded. Protective garments must cover the torso and at least have sleeves or full-length trousers. The reflectors must wrap around the torso and arm or leg. Minimum reflector width must be 50 mm.